From the leading broadcast facilities world-wide to the recording studios and the performance stages that have hosted the top musical artists of all genres for more than 60 years, the AKG C414 multi-pattern condenser microphone needs little introduction. There are few microphones that are as widely accepted as a de facto part of any professional engineer's mic locker as this famous microphone. Now, you can own a matched pair of C414 XL IIs at an affordable price with the C414 XL II/ST bundle.

FEATURES

• Omni, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate pickup patterns
• Lock Mode disables all controls easily for live and installation use
• Incredible Dynamic Range of 152 dB
• Three different bass cut filters and three pre-attenuation levels
• Peak Hold LED even detects shortest overload peaks
• Paired using AKG's sophisticated computer-aided matching method
• Highest possible correlation over the whole frequency range and virtually identical sensitivity
• Includes carrying case, two windscreens, a stereo bar, and two spider-type shock mounts
• Frequency range: 20 to 20,000 Hz
• Sensitivity: 20 mV/Pa (-34 dBV) /-0.5 dB52/158 dB (0/-6/-12/-18 dB) for 0.5% THD

SPECIFICATIONS

• Microphone Type:Condenser
• Mono/Stereo:Stereo Pair
• Polar Pattern:Omni, Wide Cardioid, Cardioid, Hypercardioid, Figure-8
• Diaphragm Size:1" (25.4mm)
• Frequency Response:20Hz-20kHz
• Max SPL:140dB (158dB w/18dB Pad)
• Output Impedance:200 ohms
• Signal to Noise Ratio:88dB
• Self Noise:6dB
• Low Cut Filter:40Hz, 80Hz (-12dB/octave), 160Hz (-6dB/octave)
• Pads:-6dB, -12dB, -18dB
• Color:Dark Grey/Gold
• Connector:XLR
• Weight:0.66 lbs. (Per Mic)
• Included Accessories:Shock Mounts, Windscreens, Stereo Bar, Aluminum Carry Case

• Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
• Signal/noise ratio: 88 dB
• Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable
• Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
• Impedance: <=200 ohms
• Recommended load impedance: >= 2,200 ohms
• Supply voltage: 48 V phantom power to DIN/IEC
• Powering: approximately 4 mA
• Connector: 3-pin XLR to IEC
• Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
• Net weight: 300g (10.6oz.)
• Requires 48V phantom power to DIN/IEC